|
Holographic Seal and Labels
There are two types of holographic seals
and labels available based on the basic substrate used. They are
1. Polyester-based
Labels
2. Paper
based labels
Polyester-based Label
The
self-adhesive polyester based label is ideal for general use where high
security is not a main priority. The main uses for this type of label
include promotional labeling uses and seals for packages e.g. cosmetics
and CDs. It is made from a polyester film, making it very versatile, and
easily applicable either by hand or machine. Serial numbering can be
printed onto the label for track and trace purposes.
|
Face
Material:
|
Polyester of thickness 23 & 50 microns. Available in gold and
silver. (Other thickness and colours available upon request –
volume quantities apply).
|
|
Adhesive:
|
Permanent adhesive of rubber or acrylic composition, selection
dependent upon application.
|
|
Service Temp:
|
-10 to 90 degree Celsius
|
|
Backing:
|
Standard: a 80 gsm glassine release liner.
Special request: clear polyester release liner.
|
|
Delivery:
|
Kiss-cut on rolls or in sheets or cut individually to size. Also
available as a tape with a release liner.
|
|
Tamper Evidence:
|
High – upon attempt of removal the image is destroyed.
|
|
Applications:
|
Ideal for food packaging, and can also be bonded to clothing with
appropriate adhesive.
Media:
Video, Cassettes, CD's, Computer software disks
Personal Items:
Perfumes and Cosmetics, Toys and Games, Sports Equipment, Watches
Other:
Agrochemicals Textile labeling and can also
|
|
Method of
Application:
|
By
hand or automatic label application.
|
Paper-based Label
The
paper-based label can be used as a seal, or as an information label,
whilst at the same time providing the authenticity supplied by the
holographic strip. The paper label is ideal for cases where additional
labels are needed, such as food and beverage packages where ingredients
and nutritional information must be provided. The paper label will work as
a two-in-one label in these cases. Any attempt to remove it will result in
the label tearing.
|
Face Material:
|
Polymer on paper
|
|
Metallisation:
|
Optical density 2.2
|
|
Adhesive:
|
Permanent adhesive of rubber or acrylic composition. Selection
depends upon application.
|
|
Service Temp:
|
0° to 70°Celsius Backing: Glassine of 70 GSM Delivery :
Kiss-cut on rolls.
|
|
Tamper Evident:
|
Good, label tears or image is damaged on attempting to
remove the label.
|
|
Applications:
|
Seal
on packs, label on bottles, products etc.
|
|
Method of Application :
|
Automatically or by hand.
|
|
